Facsimile Features
142
4
Programming Initial Set Up of a Special Sender
This section describes how to program Initial Set Up of a Special Sender.
Program the “Initial Set Up” of a Special Sender. You can also specify the Bypass
Tray Paper Size.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [Program Special Sender].
D Press [Initial Set Up].
E Select the function you want to program.
In this feature, “Authorized RX” has the same settings as “Reception Set-
tings”. See "Reception Settings".
F Press [Exit].
G Press the {User Tools/Counter} key.
Reference
p.97 “Reception Settings”
Programming Authorized RX and Special RX Function
A Select [Authorized RX] or [Special RX Function].
B Select [On] or [Off], and then press [OK].
The illustration shows the "Authorized RX" display as an example.
To Next Page
Loading...
