Administrator Tools
69
2
Reference
p.3 “Accessing User Tools”
p.183 “Address Book”
p.197 “Printing the Counter for Each User”
p.246 “Registering the Transfer Request”
p.259 “Counter”
Program / Change / Delete LDAP Server
This section describes how to specify the LDAP server settings.
To program / change the LDAP server
This section describes how to program / change the LDAP server.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Program / Change / Delete LDAP Server].
D Check that [Program / Change] is selected.
E Select the LDAP server you want to program or change.
When programming the server, select [*Not Programmed].
F Set each item as necessary.
G Press [OK] after setting each item.
For details about LDAP server, see "Programming the LDAP server".
H Press [Exit].
I Press the {User Tools/Counter} key.
Reference
p.70 “Programming the LDAP server”
To Next Page
Loading...
