Ricoh Aficio MP 3010 - Programming;Changing Personal Boxes

Box Settings
147
4
Programming/Changing Personal Boxes
This section describes how to program and change Personal Boxes.
You can program the following items:
•Box name (required)
Up to 20 characters long
• SUB Code (required)
Up to 20 characters long and can be composed of digits 0-9, “#", “*", and spaces
(the first character cannot be a space).
• Password (optional)
Up to 20 characters long and can be composed of digits 0-9, “#", “*", and spaces
(the first character cannot be a space).
When programming a password, a mark is displayed before the Box name.
• Receiver (optional)
You can program one delivery destination for each Personal Box. Specify a
delivery destination programmed in Destination key.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [Box Setting].
D Check that [Program / Change] is selected.
E Select a box to program.
When programming a new box, press [*Not Programmed].
To change a box already programmed, press it and proceed to step
H
.
F Press [Personal Box].
G Enter a box name, and then press [OK].
H Enter a SUB Code.
To change the SUB Code, press [Clear] or the {Clear/Stop} key, and then try
again. To change a Box name, press [Box Name], and then repeat from step
G
.