Ricoh Aficio MP 3010 - Using FTP to Connect

Registering Folders
223
7
E Check that [Program / Change] is selected.
F Select the name whose folder you want to delete.
Press the name key, or enter the registered number using the number keys.
If you press , you can search by the registered name, user code, fax number,
folder name, e-mail address, or IP-Fax destination.
G Press [Folder].
H Press the protocol which is not currently selected.
A confirmation message appears.
I Press [Yes].
J Press [OK].
K Press [Exit].
Note
❒ To delete the name, key display, and title, see “Deleting a Registered Name”.
Reference
p.191 “Deleting a Registered Name”
Using FTP to Connect
This section describes the procedure for registering, changing, and deleting FTP
folders.
Note
❒ To register a shared folder configured in Windows, see “Using SMB to Connect”.
❒ To register a folder in an NetWare server, see “Using NCP to Connect”.
Reference
p.217 “Using SMB to Connect”
p.229 “Using NCP to Connect”
Registering an FTP Folder
This section describes how to register an FTP folder.
A Press [System Settings].