Registering Addresses and Users for Facsimile/Scanner Functions
244
7
H Press [Destination] or [Sender] under Use Name as.
Both [Destination] and [Sender] can be selected at the same time.
I Press [Folder Destination] or [Sender] under Protection Object.
Both [Folder Destination] and [Sender] can be selected at the same time.
J Press [Change] under Protection Code.
K Enter a protection code using the number keys, and then press the {q} key.
L Press [OK].
M Press [Exit].
Note
❒ Specify a protection code of up to eight digits. You can also specify “Pro-
tection” without specifying a protection code.
Registering a Protection Code to a Group User
This section describes how to register a Protection Code to a Group User.
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext].
D Press [Address Book: Program / Change / Delete Group].
E Check that [Program / Change] is selected.
F Press the group key you want to register or enter the registered number us-
ing the number keys.
If you press , you can search by the registered name, user code, fax number,
folder name, e-mail address, or IP-Fax destination.
G Press [Protection].
To Next Page
Loading...
