Registering Addresses and Users for Facsimile/Scanner Functions
254
7
J Enter the login user name, and then press [OK].
K Press [Change] under Login Password.
L Enter the password, and then press [OK].
M Enter the password again to confirm, and then press [OK].
N [OK].
Note
❒ To register the name, see Registering Names”.
❒ You can enter up to 191 characters for the user name.
❒ When using POP before SMTP Authentication, you can enter up to 63 char-
acters.
❒ You can enter up to 64 characters for the password.
❒ To change the SMTP Authentication settings, repeat step
B
to
N
.
Reference
p.188 “Registering Names”
p.13 “Network Settings”
"Entering Text", About This Machine
LDAP Authentication
This section describes how to register LDAP Authentication.
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand. For details, see
“LDAP Server Settings", Network Guide.
Important
❒ When [Do not Specify] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program / Change LDAP Server of
Administrator Tools settings applies. For details, see "LDAP Server Settings".
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext].
To Next Page
Loading...
