Connecting the Machine to a Telephone Line and Telephone
39
1
Selecting the Line Type
This section describes how to select the line type.
Select the line type to which the machine is connected. There are two types: tone
and pulse dial.
Select the line type using Administrator Tools.
Note
❒ This function is not available in some regions.
Reference
p.110 “Select Dial / Push Phone”
Connecting the Optional Handset or an External Telephone
You can connect the optional handset or an external telephone to the machine.
You can use it for telephone calls.
Limitation
❒ When you use the optional handset or an external telephone with the {On
Hook Dial} key for telephone calls, you can not talk with the other party with-
out pressing the {On Hook Dial} key after taking off the receiver.
❖ Specifying the handset line type
The switch on the handset should be in the appropriate position-TT (Tone Di-
aling) or DP (Pulse Dialing).
ND1X00E0
To Next Page
Loading...
