Registering Addresses and Users for Facsimile/Scanner Functions
210
7
Programming the SEP Code
This section describes how to program the SEP Code.
A Press [Adv. Features], and then press [SEP Code].
B Press [Change] under RX SEP Code.
C Enter a SEP Code using the number keys, and then press [OK].
D To enter a password, press [Change] under Password (PWD).
E Enter a password using the number keys, and then press [OK].
F Press [OK].
Changing a IP-Fax Destination
This section describes how to change a IP-Fax Destination.
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext].
D Press [Address Book Management].
E Check that [Program / Change] is selected.
F Select the name whose IP-Fax destination you want to change.
If you press , you can search by the registered name, user code, fax number,
folder name, e-mail address, or IP-Fax destination.
G Press [Fax Dest.].
H Press [IP-Fax].
I Press [Change] under ”IP-Fax Destination”.
J Enter the new destination, and then press [OK].
To Next Page
Loading...
