Registering Addresses and Users for Facsimile/Scanner Functions
220
7
Locating the SMB folder using Browse Network
This section describes how to locate the SMB folder using Browse Network.
A Press [Browse Network].
The client computers sharing the same network as the machine appear.
If you have already specified your user name and password in steps
G
to
M
on "Registering a SMB Folder", the Network display only lists client comput-
ers you are authorized to access.
B Select a client computer.
Shared folders under it appear.
You can press [Up One Level] to switch between levels.
C Select the folder you want to register.
D [OK].
If a Login Screen Appears
This section describes how to log on to the machine if the login screen appears
when you try to access a folder by browsing the network.
If you have not specified folder authentication, or if an incorrect user name or
password has been entered for folder authentication, the login screen appears.
A Enter the login user name, and then press [OK].
Enter the login user name specified for folder authentication.
B Enter the password, and then press [OK].
The path to the selected folder appears.
If a message appears, press [Exit], and then enter the login user name and
password again.
To Next Page
Loading...
