Ricoh Aficio MP 3010 - Page 67

File Transfer
59
2
❖ Program / Change / Delete E-mail Message
You can program, change, or delete the e-mail message used when sending
an Internet fax or scan file as an attachment.
Program / Change:
A Press [System Settings].
B Press [File Transfer].
C Press [TNext].
D Press [Program / Change / Delete E-mail Message].
E Press [*Not Programmed].
To change the registered e-mail message, select the e-mail message to
change.
F Press [Change].
G Enter a name, and then press [OK].
Enter the name using up to 20 characters.
H Press [Edit].
To start a new line, press [OK] to return to the e-mail message screen, and
then press [TNext] in "Select Line to Edit:".
I Enter the text, and then press [OK].
Enter up to five lines of text. Each line can consist of up to 80 characters.
J Press [OK].
K Press [Exit].
Delete:
A Press [System Settings].
B Press [File Transfer].
C Press [TNext].
D Press [Program / Change / Delete E-mail Message].
E Press [Delete].
F Select the e-mail message to delete.
The confirmation message about deleting appears.
G Press [Yes].
H Press [Exit].