Ricoh Aficio MP C2050 User Manual

PaperCut – Ricoh Embedded Manual Revision: 19 2012-10-26
Copyright © 2012 PaperCut Software International Pty. Ltd., All Rights Reserved. 7 of 41
2.2 Setup Procedure
2.2.1 Verify Access to the Ricoh Administrative Web Interface
Ricoh devices have an embedded web server that provides an alternate administration
interface. This web interface is useful as an alternative way to stop or uninstall the
embedded application as required. To verify admin access:
1. On a computer, open your web browser
2. Enter the URL of the Ricoh device. E.g. http://ricoh-device-ip/
3. Click the "Login" link at the top right of the page.
4. Enter the device administrator username and password (default admin/blank), and
press "Login".
5. Under Device Management, select the "Configuration" menu option from the left.
6. Scroll down and confirm that the "Startup Setting" option under "Extended Feature
Settings" is visible and accessible; but don’t select it.
7. Scroll down and confirm that the "Uninstall" under "Extended Feature Settings" is
visible and accessible.
2.2.2 Networking/Firewall Configuration
Ensure that your networking/firewall configuration allows inbound connections from the
Ricoh devices to the PaperCut server on ports 9193.
2.2.3 PaperCut Settings
1. Log in to the PaperCut administration interface using a web browser (e.g.
http://papercut-server:9191/admin ).
2. Navigate to ‘Options -> Advanced’ and ensure the option ‘Enable external hardware
integration’ is enabled.
3. Press ‘Apply’.
2.2.4 Choosing Application Version
PaperCut offers 2 versions of the Ricoh Embedded application, targeted at different versions
of the Ricoh platform. You must install the version of the application suited to your Ricoh
device. The following applications are available:
 403046656 – For SDK 2.x devices
 403046912 – For SDK 4.x (or higher) devices (supporting card readers, zero-stop,
etc)
Check the list of devices in 2.1.1 and 2.1.3 above to determine which application to install.
IMPORTANT: For the remainder of this document we will assume you are installing
application version 403046912, if you are installing the SDK 2.x version (403046656) then
do not follow the instruction for 4.x devices only.

Ricoh Aficio MP C2050 Specifications