3
1. When the Machine Does
Not Operate as Wanted
This section explains basic troubleshooting procedures that are applicable to all
functions of this machine.
Indicators
This section explains Indicators displayed when the machine requires the user
to remove misfed paper, add paper, or other perform other procedures.
x: Misfeed indicator Appears when a misfeed occurs. See p.103 “Removing
Jammed Paper”.
B: Add Paper indicator Appears when paper-out condition occurrs. See p.79
“Loading Paper”.
D: Add Toner indicator Appears when toner runs out. See p.90 “Adding Toner”.
d: Add Staple indicator Appears when staples run out. See p.111 “Removing
Jammed Staples”.
y: Empty Hole Punch Receptacle
indicator
Appears when punch Receptacle Full. See p.114 “Re-
moving Punch Waste”.
To Next Page
Loading...
