79
6. Adding Paper, Toner and
Staples
This chapter explains troubleshooting procedures that are applicable to all the
machine's functions.
Loading Paper
This section explains what to do when paper runs out and needs reloading.
CAUTION:
Tray 1 and LCT use A4 K exclusively. Load only A4 paper at all times.
Note
❒ Fan the paper before loading.
❒ Straighten curled or warped paper before loading.
❒ If you want to load Letter- sized paper (8
1
/
2
" × 11"K) paper in Tray 1 or LCT,
contact your service representative.
❒ For paper types and sizes, see "Recommended Paper Sizes and Types", About
This Machine.
❒ To load paper in the bypass tray, see "Using the Bypass Tray", Copy/Docu-
ment Server Reference.
• When loading paper, take care not to trap or injure your fingers.
To Next Page
Loading...
