When the Machine Does Not Operate as Wanted
8
1
When You Have Problems Operating the
Machine
The following chart gives explanations of common problems and messages.
If other messages appear, follow the instructions displayed.
Problem Cause Solution
"
Please wait." ap-
pears.
This message appears when you
turn on the operation switch.
Wait for the machine to get ready.
"
Please wait." ap-
pears.
This message appears when you
change the toner cartridge.
Wait for the machine to get ready.
Although the copier
screen appears when
the machine is turned
on using the main pow-
er switch, it cannot be
switched to another
screen by pressing the
{Facsimile} or {Scanner}
key.
Functions other than the copier
function are not yet ready.
Wait a little longer.
The machine has just
been turned on and the
User Tools screen is dis-
played,but the User
Tools menu has items
missing.
Functions other than the copier
function are not yet ready. Time
required varies by function.
Functions appear in the User
Tools menu when they become
ready for use.
Wait a little longer.
The display is off. The screen contrast knob is
turned to the dark position.
Set the screen contrast knob to the
light position to see the display
panel properly. See "Control Pan-
el",About This Machine.
The display is off. The machine is in Energy Saver
mode.
Press the {Energy Saver} key to
cancel Energy Saver Mode.
mode.
The display is off. The operation switch is turned
off.
Turn on the operation switch.
Nothing happens when
the operation switch is
turned on.
The main power switch is turned
off.
Turn on the main power switch.
"
Memory is full.
Do you want to
store scanned
file?
" appears.
The scanned originals exceed the
number of sheets/pages that can
be stored in the hard disk.
• Press [Store File] to store pages
that have been scanned. De-
lete unnecessary files with
[Delete File].
• Press [No] if you are not stor-
ing pages that have been
scanned. Delete unnecessary
files with [Delete File].
To Next Page
Loading...
