Troubleshooting When Using the Printer Function
64
4
When PictBridge Printing Does Not Work
This section explains likely causes and possible solutions for problems that can
occur when PictBridge printing.
Problem Cause Solution
PictBridge is not available.
There is a problem with the USB
connection or the PictBridge set-
tings.
Use the following procedure to
check the connection and set-
tings:
A Disconnect and then recon-
nect the USB cable.
B Check the PictBridge settings
are enabled.
C Disconnect the USB cable, and
then turn off the machine.
Turn the machine back on.
When the machine has fully
booted up, reconnect the USB
cable.
When two or more dig-
ital cameras are con-
nected, the second and
subsequent cameras are
not recognized.
You have connected multiple
digital cameras.
Connect one digital camera only.
Do not connect multiple cameras.
Printing is disabled. The number of originals exceeds
the maximum number of pages
that can be printed at a time.
The maximum specifiable print
quantity at a time is 999.Respeci-
fy the quantity to 999 or less, and
then retry printing.
Printing is disabled. There is no paper of the specified
size remaining.
There is no paper of the specified
size remaining.
If you have to use paper that is
not of the specified size, perform
Form Feed. To cancel printing,
perform Job Cancel.
To Next Page
Loading...
