Loading Paper
81
6
C Carefully push the paper tray fully in.
Note
❒ If you load a paper size that is not selected automatically, you will need to
specify the paper size with the control panel. Following paper sizes that
are not selected automatically.
•8
1
/
2
"×14"L
•8
1
/
2
"×11"KL
• 11"×17"L
•8
1
/
4
"×14"L
•7
1
/
4
"×10
1
/
2
"KL
•8"×13"L
•8
1
/
2
"×13"L
•8
1
/
4
"×13"L
•8KL
• 16KKL
Reference
p.84 “Changing the Paper Size”
p.87 “Changing to a Size That is Not Automatically Detected”
Loading Paper into the Large Capacity Tray
The following procedure explains loading paper into the LCT.
Important
❒ LCT (optional) uses A4K paper exclusively. Only load A4K paper. If you
want to load 8
1
/
2
"×11"K, contact your service representative.
❒ Align the paper stacks and load them against the left and right walls, or a pa-
per misfeed might occur.
❒ Do not stack paper over the limit mark.
A Pull out the LCT, slowly until it stops.
AMJ003S
To Next Page
Loading...
