27
3. Troubleshooting When
Using the Facsimile Function
This chapter explains likely causes of and possible solutions for facsimile func-
tion problems.
Adjusting the Volume
The following describes how to adjust the volume.
You can change the volume of the following sounds that the machine makes.
❖ On Hook Mode
Heard when the [On Hook] is pressed.
❖ At Transmission
Heard when Immediate transmission is performed.
❖ At Reception
Heard when the machine receives a document.
❖ At Dialing
Heard after pressing the {Start} key, until the line connects to the destination.
❖ At Printing of Received Document
Heard when a received document is printed.
A Press {User Tools/Counter} key.
B Press [Facsimile Features].
AMG003S
To Next Page
Loading...
