When the Machine Does Not Operate as Wanted
16
1
Note
❒ Stapling cannot be used at the same time for multiple functions.
❒ If the machine is capable of executing multiple functions simultaneously,
specify which function should have priority in “Print Priority”. This setting is
factory-preset to “Display mode”. For setting of Printing Priority Function,
see "Print Priority", General Settings Guide.
❒ When Booklet Finisher, 500-sheet Finisher or 1000-sheet Finisher is installed
on the machine, you can specify the output tray where documents are deliv-
ered. See "Output tray settings", General Settings Guide.
❒ While printing is in progress, scanning a document using another function
may take more time.
To Next Page
Loading...
