When a Message Appears
35
3
Note
❒ If the "Check whether there are any network problems." message ap-
pears, the machine is not correctly connected to the network or the settings of
the machine are not correct. If you do not need to connect to a network, you
can specify the setting so this message is not displayed, and then the {Facsim-
ile} key no longer lights. See "Parameter Settings", General Settings Guide. If
you reconnect the machine to the network, be sure to set "Display" with User
Parameters.
❒ If the paper tray runs out of paper, "
Add paper." appears on the display, ask-
ing you to add more paper. If there is paper left in the other trays, you can re-
ceive documents as usual, even if the message appears on the display. You
can turn this function on or off with "Parameter Setting". See "Parameter Set-
tings", General Settings Guide.
Check whether
there are any
network prob-
lems.
{15-12}
Cannot log on to the
POP3/IMAP4 server.
• Check that the user name and
password of the E-mail Ac-
count are correctly pro-
grammed from File Transfer
under System Settings. See
"File Transfer Settings", Gen-
eral Settings Guide. You can
also use the Web Image Mon-
itor for confirmation. See the
Web Image Monitor's Help.
• Check that the user name and
password for POP before
SMTP authentication are cor-
rectly programmed from File
Transfer under System Set-
tings. See "File Transfer Set-
tings",General Settings Guide.
You can also use the Web Im-
age Monitor for confirmation.
See the Web Image Monitor's
Help.
• Consult the administrator.
Message Cause Solution
To Next Page
Loading...
