When a Message is Displayed
69
5
Exceeded max.
number of files
which can be
sent at the same
time. Reduce the
number of the
selected files.
The number of files exceeded the
maximum number possible.
Reduce the number of files and
send them again.
Cannot detect
original size.
Place original
again, then
press the Start
key.
You have loaded paper of a size
not shown on the paper size se-
lector.
• Place the original correctly.
• Specify the scan size.
• When placing an original di-
rectly on the exposure glass,
the lifting/ lowering action of
the ADF triggers the automat-
ic original size detection proc-
ess. Lift the ADF by more than
30 degrees. See "Placing Orig-
inals", Copy/Document Serv-
er Reference.
Exceeded max.
No. of results
to display.
Max.:
Search results have exceeded the
max. displayable number.
Search again after changing the
search conditions.
You do not have
the privileges
to use this
function.
The machine has not been set to
allow you to use the function.
Contact the administrator.
Exceeded max.
number of stand-
by files.Try
again after the
current file is
sent.
The maximum number of stand-
by files was exceeded.
There are 100 files waiting in the
sending queue for e-mail, Scan to
Folder, or delivery functions.
Wait until files have been sent.
Exceeded time
limit for LDAP
server search.
Check the server
status.
A network error has occurred
and connection has failed.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of System Set-
tings. See "System Settings", Gen-
eral Settings Guide.
Message Cause Solution
To Next Page
Loading...
