Loading Paper
83
6
Orientation-Fixed Paper or Two-Sided Paper
The following explains loading paper whose orientation and print side is speci-
fied (letterhead paper).
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead
paper, punched paper, or copied paper) might not print correctly, depending on
how the originals and paper are placed. Select [On] in Letterhead Setting under
Copier/Document Server Features, and then place the original and paper as
shown below. See "Letterhead Setting", General Settings Guide. When printing
with the printer function, placement orientation is the same.
❖ Original Orientation
❖ Paper Orientation
Note
❒ For [System Settings], specify Letterhead as "Paper Type" for the paper tray
you want to use. See "Tray Paper Settings", General Settings Guide.
Exposure glass ADF
•copy
•scanner
Paper loading Paper tray Bypass tray
Copy mode
Place originals
on the exposure
glass.
Place originals
in the ADF.
Place originals
on the exposure
glass.
Place originals
in the ADF.
Paper orienta-
tionK
Paper orienta-
tionL
To Next Page
Loading...
