Ricoh Aficio MP C300

You can change the stamp color, position, pages to be stamped, and numbering.
5. After making all settings, press [OK].
6. Press [OK].
• The default color is black.
• You can change the settings for Page Numbering under Stamp in User Tools. For details about Stamp,
see “Stamp”.
• You can change the stamp position if Combine or Duplex is specified for use with this function under
Duplex Back Page Stamping Position or Page Numbering in Combine in User Tools. For details about
these settings, see “Stamp”.
• When Page Numbering is used with Combine, Magazine, or Booklet function, page numbers are
printed as follows:
• Per Original is selected in Page Numbering in Combine:
With 1 Sided/2 Sided using the Combine function
BZH170
With the Magazine or Booklet function
BZH171
• Per Copy is selected in Page Numbering in Combine:
With 1 Sided/2 Sided using the Combine function
BZH172
• If you combine this function with the Duplex (Top to Top) function and select [P1,P2...] or
[1/5,2/5...], page numbers on the back are printed as follows:
Stamps
137
4