1. Front
2. Back
• p.205 "Stamp"
Changing the stamp position
Changes the stamp position.
1. Press [Change] under Stamp Position.
2. Select the stamp position, and then press [OK].
Changing the stamp color
Changes the stamp color.
1. Press [Stamp Color] under Stamp Color.
2. Select the stamp color, and then press [OK].
Specifying the first printing page and start number (“P1,P2...”, “-1-,-2-...”, “P.1,P.2...”,
“1,2...”)
Specify the first printing page and start number.
The example below shows when the first printing page is “2” and the start number is “3”.
4. Advanced Copying
138
To Next Page
Loading...
