Ricoh Aficio MP C4502 General Settings Guide

Facsimile Features
136
4
Changing the User Parameters
This section describes how to set parameters.
Important
❒ Access to some User Parameter Settings may require options, or other settings
may need to be made beforehand.
❒ It is recommended that you print and keep a User Parameter list when you
program or change a User Parameter.
❒ Do not change any bit switches other than those shown on the previous pages.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [TNext].
D Press [Parameter Setting].
E Select the switch number you want to change.
F Select the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat from step
F
to change another bit number for the same switch.
G Press [OK].
To cancel these settings, press [Cancel]. The display returns to that of step
E
.
H Repeat step
E
through step
G
to change the switch settings.
I After all the settings are finished, press [Exit].
J Press the {User Tools/Counter} key.

Ricoh Aficio MP C4502 Specifications

General

Print Technology	Laser
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	4, 400 sheets
Automatic Duplexing	Yes
Maximum Scan Resolution	600 dpi
Fax Capability	Optional
Maximum Paper Size	12" x 18"
Memory (Standard)	1.5 GB
Hard Drive	250 GB
Copy Resolution	600 x 600 dpi
Print Speed	45 ppm
Standard Paper Capacity	1, 200 sheets
Scanner Type	Flatbed, ADF
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Copy Speed	Up to 45 ppm (Black/Color)
Fax Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux