Ricoh Aficio MP C4502 General Settings Guide

Administrator Tools
71
2
Program / Change / Delete LDAP Server
This section describes how to specify the LDAP server settings.
To program / change the LDAP server
This section describes how to program / change the LDAP server.
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext] twice.
D Press [Program / Change / Delete LDAP Server].
E Check that [Program / Change] is selected.
F Select the LDAP server you want to program or change.
When programming the server, select [*Not Programmed].
G Set each item as necessary.
H Press [OK] after setting each item.
For details about LDAP server, see "Programming the LDAP server".
I Press [Exit].
J Press the {User Tools/Counter} key.
Reference
p.72 “Programming the LDAP server”
To delete the programmed LDAP server
This section describes how to delete the programmed LDAP server.
A Press [System Settings].
B Press [Administrator Tools].
C Press [TNext] twice.
D Press [Program / Change / Delete LDAP Server].
E Press [Delete].
F Select the LDAP server you want to delete.
G Press [Yes].
H Press [Exit].

Ricoh Aficio MP C4502 Specifications

General

Print Technology	Laser
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	4, 400 sheets
Automatic Duplexing	Yes
Maximum Scan Resolution	600 dpi
Fax Capability	Optional
Maximum Paper Size	12" x 18"
Memory (Standard)	1.5 GB
Hard Drive	250 GB
Copy Resolution	600 x 600 dpi
Print Speed	45 ppm
Standard Paper Capacity	1, 200 sheets
Scanner Type	Flatbed, ADF
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Copy Speed	Up to 45 ppm (Black/Color)
Fax Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux