77
3. Copier / Document Server
Features
This chapter describes user tools in the Copier / Document Server Features
menu. For details on how to access Copier / Document Server Features, see "Ac-
cessing User Tools".
General Features
This section describes the user tools in the General Features menu under Copier /
Document Server Features.
Default settings are shown in bold type.
❖ Auto Paper Select Priority
Auto Paper Select is the default setting. You can cancel this setting.
The default setting is On.
❖ Auto Tray Switching
If you load paper of the same size in two or more trays, the machine automat-
ically shifts to the other when the first tray runs out of paper (when Auto Pa-
per Select is selected.) This function is called “Auto Tray Switching”. This
setting specifies whether to use Auto Tray Switching or not.
• With Image Rotation
Use to copy when using the Auto Tray Switching function.
• Without Image Rotation
Only copies with Auto Tray Switching if you load paper of the same size
and in the same orientation in two or more trays. If the paper is not the
same size or in the same orientation, copying is interrupted and the mes-
sage “Load paper.” is displayed.
•Off
When a paper tray runs out of paper, copying is interrupted and the mes-
sage “Load paper.” is displayed.
The default setting is With Image Rotation.
❖ Paper Display
You can choose to have the available paper trays and sizes shown on the ini-
tial display.
The default setting is Display.
If you select [Hide], the display is shown as below. Press [Auto Paper Select] to
display paper sizes.
To Next Page
Loading...
Need help?
General
