Ricoh Aficio MP C4502 General Settings Guide

Facsimile Features
140
4
Reference
p.101 “Reception Settings”
p.143 “Programming/Changing Special Senders”
p.144 “Authorized RX (Authorized Reception)”
p.145 “Forwarding”
Authorized Reception
Use this function to limit incoming senders.
The machine only receives faxes from programmed Special Senders, and there-
fore, it helps you screen out unwanted documents, such as junk mail, and saves
wasting fax paper.
Note
❒ To use this function, program the Special Senders function, and then select
“On" in “Authorized RX" with “Reception Settings". See "Reception Settings",
and Parameter Settings" (switch 08, bit 2).
❒ Without programming Special Senders, the Authorized RX function will not
work, even if you select “On".
❒ You can select to receive only from programmed senders or receive only from
senders other than those programmed in User Parameters. See "Parameter
Settings" (switch 08, bit 2).
❒ If you select “Off" for “Authorized RX" in “Initial Set Up", settings are the
same as the Reception Settings.
❒ You can change Special Senders in the same way as you program them.
Reference
p.101 “Reception Settings”
p.131 “Parameter Settings”

Ricoh Aficio MP C4502 Specifications

General

Print Technology	Laser
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	4, 400 sheets
Automatic Duplexing	Yes
Maximum Scan Resolution	600 dpi
Fax Capability	Optional
Maximum Paper Size	12" x 18"
Memory (Standard)	1.5 GB
Hard Drive	250 GB
Copy Resolution	600 x 600 dpi
Print Speed	45 ppm
Standard Paper Capacity	1, 200 sheets
Scanner Type	Flatbed, ADF
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Copy Speed	Up to 45 ppm (Black/Color)
Fax Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux