Printer Features
174
5
❖ Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority,
according to paper size or resolution.
• Font Priority
This setting uses memory for registering fonts.
•Frame Priority
This setting uses frame memory for high speed printing.
The default setting is Frame Priority.
❖ Duplex
You can select to have print on both sides of each page.
The default setting is Off.
❖ Copies
You can specify the number of print sets. This setting is disabled if the num-
ber of pages to print has been specified with the printer driver or another
command.
The number of copies can be specified from 1 to 999 by increments of one.
The default setting is 1.
❖ Blank Page Print
You can select whether or not to print blank pages.
The default setting is On.
The printer does not identify pages with white-colored images as blank.
Pages that match one of the following conditions are identified as blank.
• There are no images.
• There are images but they are outside the printable area.
• There are only blank characters.
❖ Edge Smoothing
You can set to smoothen the edges of printed characters.
The default setting is On.
If you print either photo or halftone graphic images, select "Off".
❖ Toner Saving
You can save toner.
The default setting is Off.
❖ Printer Language
Specify the printer language.
The default setting is Auto.
This menu will appear under the following conditions:
• The PostScript 3 option is installed.
• Both the PostScript 3 and PCL options are installed.
❖ Sub Paper Size
You can enable the Auto Substitute Paper Size (A4, LT) feature.
The default setting is Off.
To Next Page
Loading...
Need help?
General
