Ricoh Aficio MP C4502 General Settings Guide

Registering Addresses and Users for Facsimile/Scanner Functions
210
7
Programming the SUB Code
This section describes how to program the SUB Code.
A Press [Adv. Features], and then press [SUB Code].
B Press [Change] under "TX SUB Code".
C Enter the SUB Code, and then press [OK].
D To enter the password, press [Change] under "Password (SID)".
E Enter the password, and then press [OK].
F Press [OK].
Programming the SEP Code
This section describes how to program the SEP Code.
A Press [Adv. Features], and then press [SEP Code].
B Press [Change] under "RX SEP Code".
C Enter the SEP Code, and then press [OK].
D To enter the password, press [Change] under "Password (PWD)".
E Enter the password, and then press [OK].
F Press [OK].
Setting the International TX Mode
This section describes how to set the International TX Mode.
A Press [Change] under "International TX Mode".
B Select [Off] or [On], and then press [OK].
Selecting the Fax Header
This section describes how to select the fax header.
You can register the fax header in Program Fax Information in the system set-
tings for Facsimile Features.
A Press [Change] under "Fax Header".
B Select [1st Name] or [2nd Name], and then press [OK].
Reference
p.117 “Registering Fax Information”

Ricoh Aficio MP C4502 Specifications

General

Print Technology	Laser
Maximum Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	4, 400 sheets
Automatic Duplexing	Yes
Maximum Scan Resolution	600 dpi
Fax Capability	Optional
Maximum Paper Size	12" x 18"
Memory (Standard)	1.5 GB
Hard Drive	250 GB
Copy Resolution	600 x 600 dpi
Print Speed	45 ppm
Standard Paper Capacity	1, 200 sheets
Scanner Type	Flatbed, ADF
Network Connectivity	Ethernet
Functions	Print, Copy, Scan
Copy Speed	Up to 45 ppm (Black/Color)
Fax Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux