General Features
79
3
❖ Copy Quality
You can adjust the quality level of copies for each original type (Text,
Text/Photo, Photo, Pale, Generation Copy).
•Text
Adjust text sharpness.
The default setting is Normal.
"Custom Setting" is the value set during service setup.
Choosing "Sharp" or "Sort" affects the outline sharpness of text.
•Text/Photo
When there are photo(s) and text on the original, select which takes prior-
ity.
The default setting is Normal.
"Custom Setting" is the value set during service setup.
"Normal" gives a balanced text and photo reproduction.
•Photo
For a photo original, adjust the finish quality level to match the type of
photo original.
The default setting is Print Photo.
"Custom Setting" is the value set during service setup.
Select "Print Photo" for printed photo originals, and "Glossy Photo" for
printed photo originals with fine dots.
Select "Normal" for printed photo and text originals.
•Pale
Adjust the quality level for the finish of a pale original with normal density.
The default setting is Normal.
"Custom Setting" is the value set during service setup.
• Generation Copy
Adjust the quality level so as not to thicken the lines of the finish image.
The default setting is Normal.
"Custom Setting" is the value set during service setup.
❖ Image Density
You can select one of seven original image density levels for each original
type (Text, Text/Photo, Photo, Pale, Generation Copy).
The default setting for "Text" is Normal.
The default setting for "Text/Photo" is Normal.
The default setting for "Photo" is Normal.
The default setting for "Pale" is Normal.
The default setting for "Generation Copy" is Normal.
❖ Duplex Mode Priority
You can select the type of the Duplex function effective when the power is
turned on, or modes cleared.
The default setting is 1 Sided→1 Sided (Metric version) / 1 Sided→2 Sided
(Inch version)
To Next Page
Loading...
Need help?
General
