Registering Addresses and Users for Scanner Functions
148
6
J Press the {User Tools/Counter} key.
Note
❒ To change the name, key display and title, see “Changing a Registered
Name”.
Reference
p.120 “Changing a Registered Name”
p.148 “Changing the protocol”
Changing the protocol
This section describes how to change the protocol.
A Press [SMB], or [NCP].
B A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous proto-
col.
C Enter each item again.
Reference
p.138 “Registering a SMB Folder”
Changing the registered FTP folder
This section describes how to change the registered FTP folder.
A Press [Change] under "Port No".
B Enter the new port number, and then press the {q} key.
C Press [Change] under "Server Name".
D Enter the new server name, and then press [OK].
E Press [Change] under "Path".
F Enter the new path, and then press [OK].
To Next Page
Loading...
