Getting Started
18
1
❖ Front
1. Original switching lever
Use to copy or scan folded originals.
2. Upper output stacker
When the upper output is selected, out-
put paper is stacked here.
3. Original stacker
Originals are stacked here.
4. Original cover
Open to clear jammed originals.
5. Ventilation holes
Prevent overheating.
6. Main unit
Open when paper jam or toner runs out.
7. Main unit opening lever
Use to open the main unit.
8. Main power switch
Use to turn the main power on or off. If
you will not use the machine for a long
time, disconnect the power cord. Nor-
mally, the machine should be left on.
If the machine does not operate after
turning on the operation switch, check
the main power switch is also turned on.
If off, turn it on.
9. Paper roll tray (optional)
Load a paper roll here.
10. Operation switch
Press to turn the power on (the operation
switch indicator lights up). To turn the
power off, press again (the operation
switch indicator goes off). See “Turning
On the Power”.
ATY040S
To Next Page
Loading...
