Troubleshooting When Using the Copy Function
22
2
White lines appear. When D is blinking, ton-
er is beginning to run
out.
Add toner. See p.64 “Adding Toner”.
Copies are blank. The original is not set
correctly.
When using the exposure glass, face the
originals down. See “Placing Originals”,
Copy/Document Server Reference.
A moiré pattern is pro-
duced on copies.
Your original has a dot
pattern image or many
lines.
Place the original on the exposure glass
at a slight angle.
Wrinkles appear on the
copy.
The paper is damp. • Replace the paper with new paper.
• To prevent paper absorbing mois-
ture, turn on the anti-humidity heat-
er switch. See “Guide to
Components”, About This Machine.
Problem Cause Solution
To Next Page
Loading...
