The default setting is From Left to Right.
Program / Delete Format
Store a format (background) image for use with Format Overlay. You can store up to four formats.
See "Program/Delete Overlay Format".
Margin Adjustment Priority
Specify the default setting for the margin size.
You can set the top and bottom margin size.
The default setting is Top: 20 mm, Bottom: 20 mm (Metric version) / Top: 0.8", Bottom: 0.8" (Inch
version).
The size can be set as follows:
• Meric version: 0 to 200 mm (1 mm increments)
• Inch version: 0.0" to 7.9" (0.1" increments)
Partial Copy Size
Specify the default settings of the start position (Y1) and the copy size (Y2).
The default setting is Y1: 0 mm, Y2: 210 mm (Metric version) / Y1: 0.0", Y2: 8.3" (Inch version).
The size can be set as follows:
• Type 1
• Metric version: Y1: 0 mm to 14,790 mm (1 mm increments), Y2: 210 mm to 15,000 mm
(1 mm increments)
• Inch version: Y1: 0.0" to 582.2" (0.1" increments), Y2: 8.3" to 590.5" (0.1" increments)
• Type 2
• Metric version: Y1: 0 mm to 29,790 mm (1 mm increments), Y2: 210 mm to 30,000 mm
(1 mm increments)
• Inch version: Y1: 0.0" to 1172.8" (0.1" increments), Y2: 8.3" to 1181.1" (0.1" increments)
3. Copier/Document Server Features
102
To Next Page
Loading...
