4. Printer Features
This chapter describes user tools in the Printer Features menu. For details on how to access Printer Features,
see "Accessing User Tools".
List / Test Print
This section describes the user tools in the Test Print menu under Printer Features.
Multiple Lists
You can print the configuration page and error log.
Configuration Page
You can print the machine's current configuration values.
Error Log
You can print error logs listing all errors that occurred during printing. The most recent 30 errors are
stored in the error log. If a new error is added when there are 30 errors already stored, the oldest
error is deleted. However, if the oldest error belongs to one of the following types of print jobs, it is
not deleted. Instead, it will be stored separately in error logs for each job type, up to a maximum of
30 for each log. You can check any of these print jobs for error log information.
• Sample Print
• Locked Print
• Hold Print
• Stored Print
The records of Auto Job Cancel and jobs canceled manually from the control panel can be printed.
Menu List
You can print a Menu List showing the machine's function menus.
PS Configuration / Font Page
You can print the current configuration and installed PostScript font list.
PDF Configuration / Font Page
You can print the current configuration and installed PDF font list.
Hex Dump
You can print in the Hex Dump mode.
Printing the Configuration Page
This section describes how to print the Configuration Page.
117
To Next Page
Loading...
