User Stamp
This section describes the user tools in the User Stamp menu under Stamp.
Program / Delete Stamp
You can register, change, or delete user stamps.
You can register up to four custom stamps with your favorite designs.
For details about how to program the User Stamp, see "User Stamp", Copy / Document Server
Reference.
Stamp Format:1-40
Specify how each registered User Stamps 1 to 40 is printed.
• Stamp Position
Specify where to print the User Stamp.
The default setting is Top Right.
• Adjust Stamp Position
You can adjust the position of the User Stamp within the available ranges shown below.
• Metric version:
"Top Left" T/B: 4-407mm, L/R: 4-407mm
"Top Center" T/B: 4-407mm, L/R: 203-203mm
"Top Right" T/B: 4-407mm, L/R: 4-407mm
"Center Left" T/B: 203-203mm, L/R: 4-407mm
"Center" T/B: 203-203mm, L/R: 203-203mm
"Center Right" T/B: 203-203mm, L/R: 4-407mm
"Bottom Left" T/B: 4-407mm, L/R: 4-407mm
"Bottom Center" T/B: 4-407mm, L/R: 203-203mm
"Bottom Right" T/B: 4-407mm, L/R: 4-407mm
• Inch version:
"Top Left" T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Top Center" T/B: 0.1"-16.0", L/R: 8.0"-8.0"
"Top Right" T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Center Left" T/B: 8.0"-8.0", L/R: 0.1"-16.0"
"Center" T/B: 8.0"-8.0", L/R: 8.0"-8.0"
"Center Right" T/B: 8.0"-8.0", L/R: 0.1"-16.0"
"Bottom Left" T/B: 0.1"-16.0", L/R: 0.1"-16.0"
"Bottom Center" T/B: 0.1"-16.0", L/R: 8.0"-8.0"
3. Copier/Document Server Features
106
To Next Page
Loading...
