3. Copier/Document Server Features
This chapter describes user tools in the Copier / Document Server Features menu. For details on how to
access Copier / Document Server Features, see "Accessing User Tools".
General Features
This section describes the user tools in the General Features menu under Copier / Document Server
Features.
Default settings are shown in bold type.
Auto Image Density Priority
You can set whether Auto Image Density is "On" or "Off" when the machine is turned on, reset, or
modes are cleared.
The default setting for "Text" is On.
The default setting for "Drawing" is On.
The default setting for "Text / Photo" is On.
The default setting for "Photo" is Off.
The default setting for "Background Lines" is On.
The default setting for "Patched Original" is On.
The default setting for "Generation Copy" is On.
Original Photo Type Priority
When you select "Text / Photo" or "Photo" in "Original Type Priority", you can change the settings of
the selected original type.
The default setting for "Text / Photo" is Printed Photo.
The default setting for "Photo" is Printed Photo.
Max. Copy Quantity
The maximum copy quantity can be set between 1 and 99.
The default setting is 99 sheet(s).
Auto Tray Switching
If you load paper of the same size in two or more trays, the machine automatically shifts to the other
when the first tray runs out of paper (when Auto Paper Select is selected). This function is called "Auto
Tray Switching". This setting specifies whether to use Auto Tray Switching or not.
The default setting is With Image Rotation.
• With Image Rotation
Use to copy when using the Auto Tray Switching function.
• Without Image Rotation
93
To Next Page
Loading...
