Registering Folders
This section describes the procedure for registering, changing, and deleting folders.
By registering a shared folder, you can send scan files to it directly.
There are three types of protocol you can use:
• SMB
For sending files to shared Windows folders.
• FTP
Use when sending files to an FTP server.
• NCP
Use when sending files to a NetWare server.
• For details about protocols, server names, and folder levels, consult your network administrator.
• You can prevent unauthorized users from accessing folders from the machine. See "Registering a
Protection Code".
• You can only select either SMB, FTP, or NCP. If you change protocol after finishing your settings, all
previous entries are cleared.
• p.182 "Registering a Protection Code"
Using SMB to Connect
This section describes the procedure for registering, changing, and deleting SMB folders.
• To register a folder in an FTP server, see "Using FTP to Connect".
• To register a folder in a NetWare server, see "Using NCP to Connect".
• p.160 "Using FTP to Connect"
• p.165 "Using NCP to Connect"
Registering an SMB Folder
This section describes how to register an SMB folder.
6. Registering Addresses and Users for Scanner Functions
154
To Next Page
Loading...
