Edit
This section describes the user tools in the Edit menu under Copier / Document Server Features.
Default settings are shown in bold type.
Adjust Position
Specify the default setting for Print Position Adjustment.
The default setting is Bottom: 20 mm / Right: 20 mm (Metric version) / Bottom: 0.8" / Right:
0.8" (Inch version)
• Metric version: 0 to 200 mm (1 mm increments)
• Inch version: 0 to 7.9" (0.1" increments)
Erase Border Width
Specify the width of erased border margins using this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1" boundary margin around all four
edges of each original.
The default setting is On.
Image Repeat Separation Line
You can select a separation line using the Image Repeat function from: None, Solid, Broken A, Broken
B, or Crop Marks.
• None
• Solid
• Broken A
3. Copier/Document Server Features
98
To Next Page
Loading...
Need help?
General
