• 400.0% (A E)
Reduce/Enlarge Ratio Priority
You can set the ratio that has priority when [Reduce / Enlarge] is pressed.
The default setting is 70.7% (Metric version) / 64.7% (Inch version: Engineering) / 66.7% (Inch
version: Architecture).
Magnification Key Display
Specify which scale's reproduction ratios shown on the initial display.
The default setting is Engineering.
User Auto Reduce / Enlarge: A0-A4, B1 JIS-B4 JIS
Define a user auto reduce/enlarge ratio for each document size when copying with the User Auto
Reduce / Enlarge feature.
[Off] determines whether to display a defined user auto reduce/enlarge ratio on a copier screen.
Select one of the following paper sizes for a user auto reduce/enlarge ratio defined for each
document size:
• 34 44
• 22 34
• 17 22
• 11 17
• 8
1
/
2
11
• 36 48
• 24 36
• 18 24
• 12 18
• 9 12
• p.10 "Accessing User Tools"
Reproduction Ratio
97
To Next Page
Loading...
