Programming the Realm
This section describes how to specify the Realm settings.
Program the realm to be used for Kerberos authentication.
A realm is the network area in which Kerberos authentication is used. After confirming the network
environment, specify the necessary items.
You can register up to 5 realms.
Programming the Realm
This section describes how to program the Realm.
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [ Next] twice.
4. Press the [Program / Change / Delete Realm].
5. Check that [Program / Change] is selected.
6. Press [*Not Programmed].
7. Press [Change] under "Realm Name".
Programming the Realm
89
To Next Page
Loading...
Need help?
General
