Using the e-mail address as the sender
This section describes how to use the e-mail address as a sender.
1. Press [Protection].
2. Press [Sender] under "Use Name as".
Deleting an E-mail Destination
This section describes how to delete an e-mail destination.
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
5. Select the name whose e-mail address you want to delete.
Press the name key, or enter the registered number using the number keys. You can search by the
registered name, folder name, or e-mail address.
6. Press [E-mail].
7. Press [Change] under "E-mail Address".
8. Press [Delete All], and then press [OK].
9. Press [OK].
10. Press [Exit].
11. Press the [User Tools/Counter] key.
• To delete the name, key display, and title, see "Deleting a Registered Name".
• p.140 "Deleting a Registered Name"
E-mail Destination
153