7. Select the original orientation.
8. Place the original, and then press [Start Scanning].
The original is scanned and stored.
9. Press [Exit].
10. Press the [User Tools / Counter] key.
Overwriting a Stored format
This section describes how to overwrite a stored Overlay Format.
1. Make sure the machine is ready to copy.
2. Press [Copier / Document Server Features].
3. Press [Edit].
4. Press [Program / Delete Format].
5. Check that [Program] is selected.
6. Select a format number you want to overwrite.
7. Press [Yes].
You cannot restore a format that has been overwritten.
Press [Stop] if you do not want to overwrite the existing format.
8. Select the original orientation.
9. Place the original, and then press [Start Scanning].
The original is scanned and stored.
10. Press [Exit].
11. Press the [User Tools / Counter] key.
Program/Delete Overlay Format
113
To Next Page
Loading...
