1. Press [SMB] or [FTP].
2. A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3. Enter each item again.
• p.154 "Using SMB to Connect"
• p.160 "Using FTP to Connect"
Deleting an NCP Folder
This section describes how to delete the registered NCP folder.
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
5. Select a user of the folder you want to delete.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, folder name, or e-mail address.
6. Registering Addresses and Users for Scanner Functions
170
To Next Page
Loading...
