The default setting is 0.0 mm (Metric version) / 0.00" (Inch version).
Enter a value in 0.5 mm (0.02") units in the ranging from -6.0 mm (-0.24") to 6.0 mm (0.24").
Margin Fold Margin Adjustment
Adjust the margin width ((1) in the figure below) when [Fan Fold 8
1
/
2
inch (Margin Fold)] or [Fan
Fold] is selected.
This menu appears only when the fan folding finisher or cross folding finisher is installed.
The default setting is 40 mm (Metric version) / 1.50" (Inch version).
General Features
53
To Next Page
Loading...
