Ricoh Aficio MP W7140 - Page 59

No Display, Recycled Paper, Translucent Paper, Film
The default setting for "Paper Type" is No Display.
The default setting for "Apply Auto Paper Select" is Yes.
When cut paper tray is installed, you cannot select [Film].
A mark appears next to the paper tray if [No] is selected in "Auto Paper Select".
"Auto Paper Select" can only be selected for the copier function if [No Display] and [Recycled Paper]
are selected. If [No] is selected, Auto Paper Select is not valid for the tray.
For details about the relations between possible paper sizes and thickness, see " Recommended Paper
Sizes and Types", About This Machine.
Paper Thickness: Paper Tray
Specify the thickness of paper loaded in the paper trays.
If the copy image blurs or the translucent paper loosens, changing the paper thickness level may
improve results.
The default setting for "Plain Paper" is 3.
The default setting for "Recycled Paper" is 3.
The default setting for "Translucent Paper" is 2.
The default setting for "Film" is 3.
Refer to the chart below when selecting the mode for the paper thickness.
Thickness
Paper Type
1 2 3 4 5
Plain Paper 110 g/m
2
(29.3 lb)
90 g/m
2
(23.9 lb)
70 g/m
2
(18.6 lb)
60 g/m
2
(15.9 lb)
50 g/m
2
(13.3 lb)
Recycled
Paper
110 g/m
2
(29.3 lb)
90 g/m
2
(23.9 lb)
70 g/m
2
(18.6 lb)
60 g/m
2
(15.9 lb)
50 g/m
2
(13.3 lb)
Translucent
Paper
70 - 90 g/
m
2
(18.6 -
23.9 lb)
70 - 80 g/
m
2
(18.6 -
21.3 lb)
70 - 80 g/
m
2
(18.6 -
21.3 lb)
50 - 70 g/
m
2
(13.3 -
18.6 lb)
Hemmed
paper
Film 0.07 - 0.095
mm (2.8 - 3.7
Mil)
0.07 - 0.095
mm (2.8 - 3.7
Mil)
0.07 - 0.095
mm (2.8 - 3.7
Mil)
0.07 - 0.095
mm (2.8 - 3.7
Mil)
-
When Plain Paper is used for printing in a low-temperature environment (temperature 10 °C, humidity
15%), change the thickness level from 3 to 2.
If the paper becomes loose when "Translucent Paper" is selected with a thickness level of 2, change
the thickness level to 1.
Tray Paper Settings
57
2