• Authentication
This function supports LDAP Version 2.0 and 3.0.
To use the LDAP server, select [On] under LDAP Search.
For details about how to program the LDAP Server, see "Programming the LDAP server".
LDAP Search
Specify whether or not to use the LDAP server for searching.
The default setting is Off.
If you select [Off], the LDAP server list will not appear on the search display.
AOF (Always On)
Specify whether or not to use Auto Off.
The default setting is On.
Program / Change / Delete Realm
Program the realm to be used for Kerberos authentication.
• Realm Name
• KDC Server Name
• Domain Name
Be sure to set both the realm name and KDC server name when programming a realm.
For details about Program / Change / Delete Realm, see "Programming the Realm".
Firmware Version
You can check the version of the software installed in this machine.
Network Security Level
For details about this function, consult your administrator.
Auto Erase Memory Setting
For details about this function, consult your administrator.
Erase All Memory
For details about this function, consult your administrator.
Delete All Logs
For details about this function, consult your administrator.
Transfer Log Setting
For details about this function, consult your administrator.
Data Security for Copying
For details about this function, consult your administrator.
Administrator Tools
81
To Next Page
Loading...
Need help?
General
