System Service Mode
SM Appendix 3-71 D127/D128
Transmission Speed [00 to FF h / FF (Auto)]
Each value suggests as follows:
FF= Auto / 11= 54M Fix / 10= 48M Fix / 0F= 36M Fix / 0E= 24M Fix
0D= 18M Fix / 0C= 12M Fix / 0B= 9M Fix / 0A= 6M Fix / 07= 11M Fix
06= 5.5M Fix / 05= 2M Fix / 08= 1M Fix /
13 to FE= Reserved / 12= 72M Fix / 09= 22M Fix / 01 to 04= Not used
011
WEP Key Select CTL
[00 to 11 / 00 / 1 binary]
00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
Selects the WEP key.
042
Fragment Thresh CTL [256 to 2346 / 2346 / 1]
Adjusts the fragment threshold for the IEEE802.11 card.
This SP is displayed only when the IEEE802.11 card is installed.
043
11g CTS to Self CTL [0 to 1 / 1 / 1] 0: Off, 1: On
Determines whether the CTS self function is turned on or off.
This SP is displayed only when the IEEE802.11 card is installed.
044
11g Slot Time CTL
[0 to 1 / 1 / 1] 0: 20
m, 1: 9 m
Selects the slot time for IEEE802.11.
045
WPA Debug Lyl CTL
[0 to 3 / 3 / 1]
1: Info, 2: Warning, 3: Error
Selects the debug log for WPA authentication application.
This SP is displayed only when the IEEE802.11 card is installed.
To Next Page
Loading...
