Ricoh D127 - Fusing; Exit Sensor; Fusing Unit

Fusing
D127/D128 4-10 SM
4.5 FUSING
4.5.1 FUSING UNIT
 Before handling the fusing unit, make sure that the unit is cool enough. The fusing unit
can be very hot.
1. Copy tray (
p.4-3 "Copy Tray")
2. Open the right door.
3. Connector cover [A] (
x 1)
 When reinstalling, attach the ground wire.
4. Fusing unit [B] (
x 2, x 4)
4.5.2 EXIT SENSOR
1. Fusing unit (
p.4-10 "Fusing Unit")
2. Exit sensor [A] (
x 1)