Ricoh D127 - Thermoswitches and Thermistor

Fusing
SM 4-13 D127/D128
Replacement
and
Adjustment
4.5.5 THERMOSWITCHES AND THERMISTOR
1. Hot roller assembly (
p.4-12 "Hot Roller and Fusing Lamp")
2. Thermoswitches [A] (
x 2 )
3. Thermistor [B] (
x 1)
Reassembling
Make sure of the following:
 That the thermistor is in contact with the hot roller.
 That the hot roller turns smoothly.
 Do not recycle a thermoswitch that is already opened. Safety is not guaranteed if you do
this.